Advance racing

Sheet & halyard collection for extreme sail experience

Racing is our most advanced research sector, where textile skills and knowledge of materials come together to give life to a highly customized and evolving product program that focuses on research.

In our products you will find the most innovative fibers: from Dyneema SK99, SK90, SK78, up to PBO, Vectran, Kewlar, Technora and Cordura.

The hi-tech braids in PBO, SK99 and SK78 are pre-heat-stretched and resin-coated with a polyurethane coating, and can be used undressed or combined with technical socks.

By entering the specific section it is possible to see the characteristics of all our socks.

 
  UNCOVERED PRE-STRETCHED TECHNICAL BRAIDS
 Ø  PBO XTR       SK99 XTR SK78 XTR
 Diameter Breacking load Weight Breacking load Weight Breacking load Weight
mm daN gr/mt daN gr/mt daN gr/mt
1 - - 300 1,2 210 1,1
1,5 - - 450 1,8 330 1,9
2 - - 580 2,4 450 2,5
2,5 - - - - 750 3,8
3 1.250 6,6 1.550 6,5 1.100 5,0
3,5 -   - - 1.350 8,0
4 2.200 13,3 2.950 11,5 2.350 12,0
5 3.450 20,2 4.050 17,0 3.400 16,5
6 4.700 27,0 5.500 21,0 4.850 23,5
7 6.500 38,7 8.100 30,3 6.850 32,0
8 8.700 51,0 9.800 38,6 8.250 39,0
9 10.300 61,5 12.400 49,5 10.050 50,5
10 12.830 77,8 14.600 59,0 11.900 59,5
11 14.100 93,0 16.500 62,0 13.500 70,0
12 17.300 111,0 18.500 78,0 15.500 78,5
13 18.900 127,0 22.200 95,5 17.100 90,5
14 21.100 140,0 25.300 111,0 20.500 117,0
15   - 28.600 128,0 22.500 145,0
16 - - 30.000 146,0 26.100 166,0
 

The average values ​​indicated are obtained from the laboratory tests Welcome to new buds and can be changed without notice. Other diameters are available on request. The static load of the rope must not exceed 20% of the breaking loads indicated in the table. The knot affects the breaking load with reductions of up to 60%. The splice increases the diameter by approximately 1.5 times. Exposure to atmospheric agents determines reductions in the breaking loads of the buds, depending on the intensity and duration of the same and also on the composition and construction of the product.