CARATTERISTICHE_TECNICHE: NOT FOUND
Temperature peak res. 650 °C -
Tenacity 37,0 cN/dTex -
Friction coefficent 0,18 -
Grip winch/stopper excellent -
Smothness moderata -
Abrasion resistanc excellent -
Specific weight 1,56 kg/dm -
Res. to continous work eccellente -
Colors range moderate -
UTILIZZO: NOT FOUND
- - Steering cables
- - Structural tie rods
- - Control line
* avoid direct exposure to sunlight
RICHIEDI_INFO: NOT FOUND
GAMMA_COLORI: NOT FOUND:
CORE PBO ZYLON .. .. .. .....
The creep is totally absent of this fiber; this, combined with a tenacity of 37 cn / dTex and a module of 1720 cN / dTex, make it possible to build an extremely resistant but above all extremely reactive line, dedicated to maneuvers subjected to high static and dynamic loads.
The specific weight of 1,56 kg / dm3 means that the rope is heavier than a Dyneema rope, however the melting point of 650 ° C allows unthinkable applications for the latter; the protective treatment with a mix of polyurethane resins makes it water-repellent and highly resistant to wear.
The hot pre-stretch treatment called XTR takes the diameter / load ratio to the extreme by reducing the section and increasing the breaking load at the same time.
COVER HI-TECH COVER COLLECTION
Our PBO ZYLON XTR technical braid can be supplied both covered or uncovered, ranging in a wide and complete range of solutions specifically designed for racing.
In the section Hi-Tech Cover Collection you can choose from 9 technical socks divided into three groups
I° GROUP ) Extreme loads, temperatures and abrasions
II° GROUP ) High loads, temperatures and abrasions
III° GROUP ) Loads, temperatures and medium-high abrasions
High Tech Cover Collection
-
PBO-ZYLON COVER
Extreme loads, temperatures and abrasionsCOVER'S CHARACTERISTICS- Resistance to peaks of temp 650°C
- Tear strength 37.0 cN / dTex
- Smoothness 0.18 coeff. clutch
- Grip winch / stopper 0.18 coeff. friction
- Abrasion res. excellent
- Specific weight 1,56 kg / dm3
- Res. To continuous work excellent
- Color's range poor
1 COLORI_DISPONIBILI: NOT FOUND -
PBO-DYN-PET COVER
Extreme loads, temperatures and abrasionsCOVER'S CHARACTERISTICS- Resistance to peaks of temp 353 °C
- Tear strength 26,5 cN/dTex
- Smoothness 0,12 coeff. frizione
- Grip winch/stopper 0,12 coeff. friction
- Res. abrasione excellent
- Specific weight 1,30 kg/dm3
- Res. To continuous work excellent
- Color's range wide
5 COLORI_DISPONIBILI: NOT FOUND -
PBO-PET COVER
Extreme loads, temperatures and abrasions5 COLORI_DISPONIBILI: NOT FOUND -
-
BTEC-DYN COVER
High loads, temperatures and abrasions1 COLORI_DISPONIBILI: NOT FOUND -
-
BTEC-DYN-PET COVER
High loads, temperatures and abrasions5 COLORI_DISPONIBILI: NOT FOUND -
-
BTEC-PET COVER
High loads, temperatures and abrasions5 COLORI_DISPONIBILI: NOT FOUND -
-
CRD-DYN-PET COVER
Medium-high loads, temperatures and abrasions5 COLORI_DISPONIBILI: NOT FOUND -
-
CRD-PET COVER
Medium-high loads, temperatures and abrasions5 COLORI_DISPONIBILI: NOT FOUND -
-
PET COVER
Medium-high loads, temperatures and abrasions6 COLORI_DISPONIBILI: NOT FOUND -
The following table shows the technical characteristics of the PBO-ZYLON XTR rope uncovered or covered with technical sock
| PBO ZYLON XTR | PBO ZYLON XTR + TECHNICAL COVER | |||||||||||||
| Ø | PBO XTR | Ø | FOR ALL COVER | PBO | PBO DYN PET | PBO PET | BTEC DYN | BTEC DYN PET | BTEC PET | CRD DYN PET | CRD PET | PET | ||
| Diameter | Breacking load |
Weight | Diameter | Breacking load |
Weight | Weight | Weight | Weight | Weight | Weight | Weight | Weight | Weight | |
| mm | daN | gr/mt | mm | daN | gr/mt | gr/mt | gr/mt | gr/mt | gr/mt | gr/mt | gr/mt | gr/mt | gr/mt | |
| 1 | - | - | 1 | - | - | - | - | - | - | - | - | - | - | |
| 1,5 | - | - | 1,5 | - | - | - | - | - | - | - | - | - | - | |
| 2 | - | - | 2 | - | - | - | - | - | - | - | - | - | - | |
| 2,5 | - | - | 2,5 | - | - | - | - | - | - | - | - | - | - | |
| 3 | 1.650 | 6,6 | 3 | - | - | - | - | - | - | - | - | - | - | |
| 3,5 | - | - | 3,5 | - | - | - | - | - | - | - | - | - | - | |
| 4 | 2.220 | 13.3 | 4 | - | - | - | - | - | - | - | - | - | - | |
| 5 | 3.450 | 20.2 | 5 | - | - | - | - | - | - | - | - | - | - | |
| 6 | 4.700 | 27,0 | 6 | 2.200 | 30,3 | 29,9 | 30,1 | 29,7 | 29,9 | 30,0 | 29,5 | 29,6 | 30,0 | |
| 7 | 6.500 | 38,7 | 7 | 3.500 | 45,5 | 45,0 | 45,2 | 44,6 | 44,8 | 45,1 | 44,4 | 44,5 | 45,1 | |
| 8 | 8.700 | 51,0 | 8 | 4.750 | 59,0 | 58,4 | 58,6 | 57,9 | 58,1 | 58,4 | 57,5 | 57,6 | 58,4 | |
| 9 | 10.300 | 61,5 | 9 | 5.750 | 73,3 | 72,6 | 72,9 | 71,9 | 72,2 | 72,6 | 71,5 | 71,6 | 72,6 | |
| 10 | 12.830 | 77,8 | 10 | 6.600 | 82,0 | 81,2 | 81,5 | 80,5 | 80,8 | 81,2 | 80,0 | 80,1 | 81,2 | |
| 11 | 14.100 | 93,0 | 11 | 8.640 | 105,0 | 104,0 | 104,4 | 103,0 | 103,5 | 104,0 | 102,4 | 102,5 | 104,0 | |
| 12 | 17.300 | 111,0 | 12 | 10.500 | 120,5 | 119,3 | 119,8 | 118,2 | 118,7 | 119,3 | 117,5 | 117,6 | 119,3 | |
| 13 | 18.900 | 127,0 | 13 | 11.550 | 139,5 | 138,1 | 138,7 | 136,9 | 137,4 | 138,1 | 136,0 | 136,1 | 138,1 | |
| 14 | 21.100 | 140,0 | 14 | 12.830 | 160,0 | 158,4 | 159,0 | 157,0 | 157,6 | 158,4 | 156,0 | 156,1 | 158,4 | |
| 16 | - | - | 16 | 14.100 | 209,0 | 206,9 | 207,8 | 205,1 | 205,9 | 206,9 | 203,8 | 203,9 | 207,0 | |
| 18 | - | - | 18 | 17.300 | 264,0 | 261,4 | 262,4 | 259,0 | 260,1 | 261,4 | 257,5 | 257,6 | 261,4 | |
| 20 | - | - | 20 | 21.100 | 330,0 | 326,7 | 328,0 | 323,8 | 325,1 | 326,7 | 321,8 | 322,0 | 326,8 | |
The average values indicated are obtained from the laboratory tests Welcome to new buds and can be changed without notice. Other diameters are available on request. The static load of the rope must not exceed 20% of the breaking loads indicated in the table. The knot affects the breaking load with reductions of up to 60%. The splice increases the diameter by approximately 1.5 times. Exposure to atmospheric agents determines reductions in the breaking loads of the buds, depending on the intensity and duration of the same and also on the composition and construction of the product.